Need to comply with the ' No stepping laws' ? Is your equipment against the boundary fence and within the Non-climable zone?

The 110918 model Pool Filter / Pump Cover  is designed specifically to cater for complying with the 'no stepping regulations' and if your equipment is within the non-climable zone.

This model is designed to fit a standard filter (sand or cartridge) and up to two pumps . It has 1 access point from the front (2 fully removable doors on top of each other) and 1 from the top (lid erects by 1000mm when opened )

All our Pool Filter / Pump Covers can be assembled in 15-60 minutes (on average) with no handiwork experience or any tools.

Please specify your colour selection in the notes section when checking out. 

The Material & Fabrication 

The Pool Filter & Pump Cover weights approx. between 60 and 100 KGS in total (depending on the model) and is made of 0.9 mm thick Galvanised steel and finished with dense powder coating. All external and internal accessories are either galvanized or made of solid stainless steel. 

The Galvanization means that the box is designed not to rust for 15+ years. The unique design and fabrication ensure withstanding the harsh Australian environment and extreme weather conditions.

Internal Design 

The box has 20mm thick dressed pine timber piece on the rear panel - for affixing controller units, Chlorinators and Power Points.

Engineered Ventilation Gaps 

There're also 25mm ventilation gaps at the front and back of the box allowing for proper air-flow in and out of the box to protect the equipment.

Easy access – servicing equipment 

The rear ventilation gap also allows for conduits / wirings to pass through in and out of the box (for example: power chords.). The lid can be totally removed (2 easy hinge pins on either side) allowing for larger conduits / equipment to pass through. 

The front of the box allows for unhindered access into the box - making servicing the equipment a breeze. The front door can be fully removed with no bars across the middle of the box- which means that you can physically step inside the box when servicing the equipment.

Acoustic Foam 

The 20 mm thick Acoustic Foam is industrially affixed internally on every panel – and comes certified by an independent Acoustic Engineer to reduce noise by up to 80%.

Child Safety 

The Pool Filter & Pump cover is designed with child safety features making it virtually impossible or children to access the box. The box can also be locked using any common lock.

Our Pool Filter / Pump Enclosures: 

• Reduce noise by 80%when purchased with the acoustic foam - certified by an independent Acoustic Engineer -download the report here
• Assemble in as little as 15 minutes - NO NUTS, BOLTS or any TOOLS needed.
• Offer more internal space for easier access - with no bars across the middle and a fully removable front door
• Save money on design - A custom designed box made from timber or other material will usually cost more - and won't look as good!
• Save money on equipment- Inferior or cheaper alternatives may cost you more money in the long run as they may be poorly ventilated and damage your equipment.
• Save money on running costs - A properly soundproofed box means that you can save money on electricity by turning on your equipment at night / during off-peak
• Comply with all state and council requirements with regards to soundproofing and any other structural aspects.
• Are industrially designed to provide enhanced sturdiness yet lighter than other models on the market
• Made of 0.9mm Australian made (BlueScope) galvanized steel with a thick (Dulux) powder coat finish
• Come with clear 3D  & Illustrated installation instructions
• 10 Standard colours - custom colours available on request for a small fee
• Child safety features - making it difficult for children to access the box
• 100% Australian Made